Field/Laboratory/
Industrial
Instruments, Controllers & Sensors
|
Conductivity Meter : Industrial
Online Conductivity Meter / Controller - Ideal for measuring
conductivity of water,
steam generation in power plants,
metal finishing, chemical process, pharmaceutical, drug research &
chemical waste disposal
Do you require to measure the conductivity of
water? Our Alpha1000
Conductivity Meter is ideal for steam generation in power plants,
metal finishing, chemical process, pharmaceutical, drug research &
chemical waste disposal, offering the user accurate and
reproducible results. Sharing many of the advanced features of the Alpha 2000
wall mounted unit with the advantage of being panel mountable, this
makes it ideal for custom built instrumentation such as effluent
control in fume cupboards. In the
consideration of safety issues and other constraints - the use of
panel mounted instrumentation in such industries as steam generation
in power plants, metal finishing,
chemical process, pharmaceutical production, drug research,
fermentation and chemical waste disposal is often mandatory.
Applications for the Alpha CON1000 include :
General :
Useful for any batch or on-line type application that requires
accurate pH or ORP control.
Water Purification/Treatment :
Use for batch and on-line control of incoming
process water, rinse water treatment, recirculating system and waste
water treatment.
Industrial :
Ideal for chemical processing, food processing.
aquarium, pharmaceutical, hydroponics and waste control industries.
Regulatory :
Hook to recorder to document data for regulatory
compliance.
Main Features :
- Built-In Programmable Limit, Proportional (Pulse Length or
Pulse Frequency) - ideal for precision process control
applications
- User-Customization through Advanced Setup Menu offers
flexibility in matching the controller's functions to suit
individual's specific requirement
- Automatic Calibration with Auto-Buffer Recognition eliminates
mistakes during calibration
- Symmetrical Mode Operation eliminates electronic noise
problems when used with solution ground
- One-Point Online Calibration without shutting down the line
- Hold Relay for use with float switches/flow switches and other
controllers as a failsafe function
- Two Level Password Protection prevents un authorized tampering
with settings0 to 2000 Second Time Delay Adjustment on control
and alarm delays
- Two Galvanically Isolated Scaleable 0-20/4-20 mA Outputs for
pH/ORP
- Wash Contact Relay controls electrodes cleaning systems at
desired duration and frequency
- Choice of Glass or Antimony Electrode for general purpose or
hydrofluoric acid applications
- Adjustable Hysteresis (Dead Band) prevents rapid contact
switching near set point
- Non-Volatile Memory retains all stored parameters and
calibration data even if power fails
- Large Dual Display shows pH (or ORP) with temperature
simultaneously - features clear multiple icons, set points, and
status messages
- Choice of Temperature Sensor Pt100/Pt1000 with 2-wire or
3-wire temperature input selection
- Easy Installation and Wiring with detachable plug-in
connectors
SPECIFICATIONS :
Product Code
|
EC-PHCTP1000 |
pH Range |
0.00 to 14.00 pH |
Resolution & Accuracy |
0.01 pH & ± 0.01
pH |
pH Buffer Options |
pH 1.01, 4.01, 6.86,
7.00, 9.00, 9.18, 10.01 |
No. of pH Calibration Points |
Up to 2 points |
ORP Range (% or mV) |
0 to 100%; -1000 to +
1000 mV |
Resolution & Accuracy |
0.1% Full Scale or 1
mV & ± 1 mV |
Temperature Range |
-9.9 to 125.0 °C |
Resolution & Accuracy |
0.1 °C & ± 0.5
°C |
Sensor (for ATC) |
PT100/PT1000 |
Type of Controller Setting |
Off (Monitoring);
Limit;
Proportional (Pulse Length or Pulse Frequency) |
|
0 to 2000 seconds |
Electrode Type Selection |
Glass or Antimony |
Signal Input |
Asymmetrical /
Symmetrical |
Signal Output Range |
Scaleable (pH 1 to 14) |
No. of Relays
Maximum Voltage
Maximum Current
High/Low Hysteresis Band |
2
SPDT; 1 Alarm
250 VAC
3A;
0.1 to 1.0 pH; 10 to 100 mV |
Contact Set-points |
Lo/Lo; Lo/Hi; Hi/Lo;
Hi/Hi (selectable) |
Alarm Function |
Latching / Pulse
(software) |
Wash Cycle/Duration |
0.1 to 199.9 hrs
& 1 to 1999 sec |
Power |
120 or 240 VAC/DC,
50/60 Hz |
Dimensions |
1/4 DIN (96 x 96 mm) |
Click
Here to View Process Control Instruments |