Portable Waterproof
Conductivity tester for use in water and wastewater treatment,
electroplating, drinking water, hydroponics, aquaculture, aquariums,
fish farms, swimming pools and spas :
The ECTestr™ 10 is the latest R.M.S Portable
Waterproof
Conductivity tester for use in water and wastewater treatment,
electroplating, drinking water, hydroponics, aquaculture, aquariums,
fish farms, swimming pools and spas. With new improved features like
large screen LCD that displays more annunciators, ribbed design for
firmer grip and anti-roll function.
Applications for the ECTestr™ 10 meter include :
General :
For use in water and wastewater treatment, boiler
blow-down, electroplating rinse tanks, drinking water, hydroponics,
printing industry, aquaculture, aquariums, fish farms, swimming
pools and spas.
Main Features :
- Large Display Screen
- Displays mode, ATC, battery level and temperature (+ plus
series models).
- User-Replaceable
Sensor - Replace the sensors yourself. Sensor element is of
SS316 stainless steel.
- Adjustable TDS Factor - Select
the appropriate TDS factor from 0.4 to 1.0 for more accurate
measurements.
- Waterproof, Anti-roll Design -
IP67 waterproof housing keeps tester good even under wet
conditions. Unique anti-roll ribbed design ensures firm grip.
- Innovative Cup-style -
Innovative sensor housing design can be used as dip-style or
cup-style for holding small volume of samples. Sensor casing is
made of VALOX® for superior chemical durability.
Other reliable features retained include
Self-diagnostic Messages, Push-button Calibration, Auto Power-off,
and Hold Function.
VALOX® is a registered trademark of GE
Plastic.
Model |
ECTestr™ 10 low |
ECTestr™ 10 high |
ECTestr™ 10 low+ |
ECTestr™ 10 high+ |
ECTestr™ 10 pure+ |
Range |
0 to 1990 µS/cm |
0 to 19.90 mS/cm |
0
to 1999 µS/cm |
0 to 19.99 mS/cm |
0 to 199.9
µS/cm |
Resolution |
10 µS/cm |
0.10 mS/cm |
1
µS/cm |
0.01 mS/cm |
0.1 µS/cm |
Accuracy |
± 1% of Full
Scale |
ATC |
Yes (0 to 50
°C) |
Temperature Coefficient |
2% per °C |
Calibration |
1 point |
Temperature Display |
No |
Yes |
Range |
- |
0.0 to 50.0 °C
or 32.0 to 122.0 °F |
Resolution |
- |
0.1 °C / °F |
Accuracy |
- |
± 0.5°C / 0.9
°F |
Calibration |
- |
± 5°C / 9 °F |
Non-volatile memory |
Yes |
Auto Power-off |
After 8.5
minutes from last keypress |
Power Requirement |
4 x 1.5V 'A
76' micro Alkaline Batteries |
Battery Life |
More than 150
hours |
Dimension / Weight |
Tester : 16.5
x 3.8cm ; 90g Boxed : 22 x 6 x 5 cm
; 170g |
µS/cm:
micro Siemens / cm
mS/cm: milli Siemens / cm
Value conversion: 1 mS/cm = 1000 µS/cm
Back
to Portable Pocket Testers Page
|